Dissolution testing is one of the most important tests
carried out by the pharmaceutical industry on solid dosage
forms like tablets, capsules and pellets.
Our tablet dissolution tester automates this accurate and
precise task used for Quality Control and R&D of pharmaceuticals
in its stand alone model.
This microprocessor based tester anticipates and even exceeds
USP requirements. Performance, reliability, accuracy and
operator ergonomics - the tester simply defies comparison.
Integrating this unit with the peristaltic pump and fraction
collector automates the task of sampling. This model validates
on-line system performance with a printer link.
The tester with 6 stirring stations is user friendly since
it eliminates numerous routine manual operations. The position
of the 6 test vessels plus replenishment vessel are designed
for easy accessibility. The moulded merlon jars are perfectly
cylindrical at the top and the bottom portion is a precise
hemisphere with three self - supporting legs.
The critical positioning of the stirrers in all six test
vessels and the precise distance from the bottom is achieved
automatically. A comprehensive self -check routine which
is initiated when power is switched on gives reliable self-diagnostics:
Modular construction includes plug-in PCB's making serviceability
and field upgrading an easy task.
Twelve programmable sampling intervals and RPM's can be
set. The microprocessor precisely controls and displays
the RPM using a built-in tachometer. An auto- calibration
system ensures a reliable and accurate control of temperature.
The test will not start until the set temperature is achieved.
An external probe is provided to monitor and validate bath
or individual test vessel temperature. An audible beep is
given at the end of each sampling interval.
The RUN, HALT, READY and TEMP ON LED indicators reflect
the status of the instrument.
Twelve individual mono- graphs can be set, stored and recalled
for each test sequence. These parameters are retained by
a battery backed up RAM.
Assured System Performance
A print interval from 1 to 60 minutes can be set and a documented
validation report of all critical operating parameters including
percentage deviation in RPM and difference in test temperatures
is printed during the test. Thus the system performance
is assured even when the instrument is unattended.
The Fraction Collector can collect a set of 12 samples.
which are arranged in a 6 X 12 matrix in a removable tray.
A maxi- mum volume of upto 50 ml per sample can be collected.
Standard Accessories -7 merlon jars with lids, 6 paddles,
6 baskets, 6 basket shafts, stirrer paddle, clear acrylic
water bath, external probe, polyester coated bath top plate.
Optional Accessories -Coloured acrylic-water bath, P. T.F.E.
coated paddles, gold plated baskets, sinker for capsule
as per JAPAN XI, transdermal disk, 8. 8. cylinder stirring
element, 8.8. sintered filter, sampling manifold, 250 ml
and 21iters glass jars with their respective accessories,
sampler pump, pump cassette set, tube set, 8.8. tube set,
fraction collector, sampling bottles (20/50 ml) 72 nos.,
printer (80 column).