Snap-Click loading and a swivel free basket
Autoparking of baskets at top position
Illuminated bath for better visibility
External temperature probe
Maintenance free smooth drive
Water bath for uniform temperature
Microprocessor based ED-2L is used for testing the disintegration
time of tablets, capsules and other solid dosage forms.
ED-2L is designed to meet the specifications of USP, IP,
DAB and EUR pharmacopoeia.
This latest version offers validation and wide programming
parameters with its new micro-controller. The ED-2L design
allows easy installation of the unit. A special cam-drive
ensures jerk-free movement.
ED-2L offers easy loading of the baskets with swivel
free movement through a simple yet unique Snap-Click loading
mechanism for attaching and removal of baskets.
The programmable timer can be set from seconds to minutes
and from minutes to hours. This ensures that short and
long duration tests can be conducted on the same unit.
At the end of the test the baskets are automatically parked
at the top position and the timer gives an alarm.
Illumination is provided at the base of the tester for
better viewing of the disintegration process of the test
samples. An acrylic water bath is provided to give uniform
temperature in the beaker. The temperature can be set
from 20°C to 39.9°C If and is controlled with
an accuracy of ± 0.3°C.
The built-in RTD sensor monitors the bath D temperature
and the external probe monitors beaker temperature.
Two USP Basket Assemblies, 12 discs, External temperature
probe water bath
20°C to 39.9°C
1 sec to 99 min 59 sec
0.1 999.9 min
50 mm, 30 mm / min
220 / 230 V, 50 Hz, 450 W
100 / 110 V, 50 Hz (on request)