This table top machine has been rated ideal for microdosing
sterile dry powders and external dry syrup filling. The
design is unique and extremely functional. The equipment
is simple to operate, easily moveable and occupies minimal
space. This machine gives optimum production with minimum
weight variation. This machine is suitable for filling 100
mg. to 75 gms. with interchangeable parts. On request this
machine can be manufactured to fill 75gms. to 150 gms.
Versatile, can handle microdosing and dry syrup powder filling
Pre-set revolution control with digital display for quick
setting of fill weight
Instant brake mechanism for precise fill weight
Powder level maintaining system for maintaining constant
level of powder to facilitate minimum weight variation
Weight variation ±2% max normally within 1%
Quick interchangeability in minutes for changeover of products
No mechanical settings hence can be set and operates by
Counter. provided to count number of fills.
All contact parts made of stainless steel for better GMP
Compact and easily moveable from place to place
To maintain optimum output the machine is supplied in the
following weight combinations for which interchangeable
parts are supplied at extra cost
|100 mg to 1 gm
||5 gms to 15 gms
||50 gms to 75 gms
|1 gm to 3 gms
||15 gms to 30 gms
|3 gms to 5 gms
||30 gms to 50 gms
75 to 150 Gms can be supplied with Larger Hopper and Dosing
0.5 H.P. Motor (Supplied with 440 V 3 phase or 220 V Single
phase or as per customer's requirement).
Electro magnetic clutch/brake combination unit with 24 V.
Feed motor with 1 2 V. D.C. Supply.
Stirrer geared motor with 220 V single phase
OUTPUT for dosing at pre-set counts:
30 - 35 FILLS /MIN. for Microdosing dry powder injectables.
25 - 30 FILLS / MIN. for Dry Syrups and other powders.
35"(W) x 25"(D) x 47"(H).
Weight : 1 60 Kgs. approx
Gross weight : 230 Kgs. approx.